Finished Max's Moon!

Max's Moon is done! Here he is:
 



Max's Moon finished

 

 He is sooo cute!  The piece turns out so well, but I do have to say that the pattern was the worst pattern I've ever worked with.  Very hard to read.  Hand-drawn symbols, and the back-stitching lines sometimes blend into the grid -lines.  I am glad to be done with it.  Good thing it turns out so well, that it was actually worth it.  I'm thinking this one will be the first that I am going to try the lacing method for mounting.  I may have to get a mat specially cut to the exact size needed to border the stitched area.  Once it is mounted, I'll have to measure it to see. 

I also got around to prep-ing the small Bloom project from C-SN May 2011:

small Bloom stock photo

 

I used the ez-count guidline that I pulled from Max's Moon to grid this piece. 

 

Took me less than 10 min to do.  Normally you go across and back once with each piece, which makes it really easy to pull out when you're done, but being such a small project, I used a single strand for each axis.  If you are interested in seeing how the guideline is installed, I took a few pictures of the steps, and am planning on doing up a tutorial soon. 

 

I've decided to first try it with basic white aida and pick out my own DMC colors.  I chose 989, 791, 922, 891, 208, and 726.  I'll see how it turns out.  Then I'll try it on linen with over-dyed floss.  I have 2 pieces of Cashel on order, in lavender and a pretty light green.  I'll be adding the specialty floss to my next order. 

 

I've also started gridding up the Tree Frog project today.  It is pretty easy as long as I have something white behind the black fabric.  Waiting on the stretcher bars I ordered for it to arrive, so until then, I'm just working on the grid... and the tutorial.

How much is too much?

How many projects is it normal to have on your "projects to start" queue?  I currently have 15 or so.  Once I finish up Max's Moon, I plan on starting on a pattern from Cross-Stitch and Needlework magazine (C-SN) May2013 called "Sharing my home". 

  

"Sharing my home" stock photo

 I also plan on starting a 1 or 2 or 3 more projects, and depending on which one is more portable, one will be for "on the road" work, and the others for "at home" work.

My "projects to start" list, in a rough semblance of order to start:

- Sharing my home (C-SN May 2013)

- Tree Frog Among Leaves (Dimensions kit)

- Bloom - small (C-SN May 2011)

- Bloom - large (C-SN May 2011)

- Rune Sampler (Dracolair pattern)

- Compass Rose (Dracolair pattern)

- Noel (Herrschners)

- Who Me? (C-SN May 2009)

- Berries (C-SN May 2013)

- Apples (C-SN March 2013)

- Grapes (C-SN March 2013)

- Pears (C-SN May 2013)

- Swan (Mystic Stitch)

- Paladin (Firewing Designs)

- Pussywillows (DMC free pattern)

 

I'm sure this list will change as things progress along.  In fact, the 2 Dracolair patterns were added to the mix just yesterday.  I was searching online for the best price for the Lap-Stitch Mini-Mini frame, and stumbled across the Compass Rose pattern and fell in love with it instantly.  So, I ordered it.  Later in the day, I pulled up their website and showed it to my hubby.  He noticed another pattern on their site called Rune Sampler which he fell in love with.  So, I am ordering that one too.  I am going to try setting up a smallish rotation set for projects at home.  I'll be limited to what I fit on the frames I have or have ordered recently.  This may also help me pull out the few UFOs I have in my stash.  I still work full time, and work on my bachelor's degree as life allows and spend time with my hubby and our son (Alex is currently 6 years old), so I do have to be realistic on how much I can get done.  It is quite a ways off, but I so look forward to being truly retired and having oodles of time to stitch.  A girl can dream, right? 

The new serger I ordered arrived via UPS today.  So, this weekend, I can work on binding the edges of the fabrics I have gathered for my projects so far.  I broke my old serger a couple months ago.  I was making a grime guard for the Q-snap configuration I had assembled for Max's Moon and the last step was to serge the edges on the part of the seam allowance that sticks inside.  Due to the elastic ends sticking out, it was just a bit too thick for my serger and one of the thread arms got so out of alignment that it keeps popping the top cover off.  I was so mad at myself.  I looked into getting it repaired, but the closest authorized Babylock dealer and service center is a 2.5 hour drive.  So, between the time, gas, and cost of repair (which is never cheap), I decided it just wasn't doable now, and ordered a new basic Brother serger.  A basic serger will be fine, since mostly all I do with it is bind edges of cross-stitch fabric.

 

Tomorrow we are making a trip to Las Cruces (about 1 hr away) to get some high density foam from Joanns to make some cushy seat cushions for my MIL's kitchen table chairs.  We opted to use her chairs and my table.  The backs on her chairs are better for my hubby's back, but the seats have no cushion what-so-ever. So we are going to have to make some.  With my husband driving, I will have time to work on Max's Moon.  Maybe even finish.  If that happens, I'll start on installing the ez-count guidelines in the Tree Frog fabric.  Never tried doing that in a vehicle before, so that will be an adventure, and with black fabric too.

 

good night and keep stitching!

 

Max's Moon progress

Life has finally slowed down a bit, so I am getting back to posting on my blog.  I did include the disclaimer in my blog name, hence Realm of Randomness.  The random part applies to not only what I post but how often I post.  So, now I would like to show you the progress on my current cross-stitch project... this is Max's Moon.  I've had this kit for a number of years and finally pulled it out of my stash and started working on it.



progress on Max's Moon

Actually, because I've been working on him nearly everyday, I have made quite a bit more progress since this picture was taken.  His back half is finished along with the right stump and fern.  I am currently working on all the little fuzzy hairs on him.   After that, it is just a few backstitch details in the face and paws, and it will be finished!  Since this is the first time I've shown him, I will include an image of the full project, as I plan to do every time I introduce a new project.  I know when I am blog surfing, I appreciate seeing what the finished project will look like.

Max's Moon stock photo

Tonight I am prepping the fabric for projects I plan on starting on after this one is done.  Cutting the fabric (mostly Aida, but one linen as well), remembering to add 8" to the finished size when cutting (I like 4" margins), and ironing the creases out.  I had a eureka moment tonight that I just have to share.  A couple months ago I was organizing my cross-stitch fabric stash, including measuring, cataloging, ironing, and storing  either flat in a portfolio or rolled in tubes I got from U-line.   The ironing wasn't working so well.  I spent a few hours researching online for any methods that would work better.  There was no real consensus, so I tried a few methods, like wetting the fabric and freezing it  before ironing, using the highest steam setting on the iron, and spritzing the fabric with vinegar.  All resulted in limited success.  So tonight I lamented to my hubby and Mother-in-Law about it when was again struggling with the task of getting creases out of aida and linen.  Mind you, they were both present for the multi-day task of fabric organizing I mentioned, so you'd think that if they had any helpful advice it would have come up at that time.  Well, not so much.  So imagine my surprise when MIL instructs me to use a damp ironing cloth over top the aida, and IT WORKS!  It works beautifully!!!  I can't tell you just how thrilled I am that I can finally iron aida and linen smooth of all creases so easily!

The other tidbit of happiness today... I got registered for the Stampin' Up Convention coming up in July. Woo-hoo! It is their 25th year, so they're going big this year.  Between the main Convention and the pre- and post-convention LNS events, I am going to have soooo much fun!

' Til next time - Happy Stitching (and Stamping)!